How To Shock A Well With Bleach Ideas. Typical recommended chlorine concentration to shock a well is 3 pints (6 cups or 48 fluid ounces) of household bleach for every 100 gallons of water in the system (or in the well if you’re only treating the well itself).use ordinary liquid laundry bleach to shock chlorinate the water system.use the table below to determine how much chlorine bleach you will need for. How you do this depends on the type of well.
Pour the mixture into the well and repeat until the right amount of bleach has been added to the well (see #4 above). Mix a solution with 1⁄2 gallon (1.9 l) of standard household bleach with 5 gallons (19 l) of clean water. This new yellow/red discoloration then deposits on clothes, and after drying has essentially dyed the clothes.
Table of Contents
Remove The Well Cap, Carefully Pour The Chlorine Solution Into The Well.
Mix a solution with 1⁄2 gallon (1.9 l) of standard household bleach with 5 gallons (19 l) of clean water. Connect a hose wherever possible to the faucets to discharge the highly chlorinated water onto a gravel or hidden area of the yard away from the septic system. Know when you need to chlorinate your well.
Pour The Bleach Into The Well.
To shock chlorinate a well:turn on your faucet and well pump and let the water run until you smell chlorine coming out the end of the hose.using 1/2 oz of household bleach per gallon, you’d use 0.5 x 35 = about 18 ounces of bleach to shock your well.water well disinfection procedure (continued) Outside of that, there are several other circumstances under which chlorinating your well becomes necessary: Water well disinfection procedure (continued)
Typical Recommended Chlorine Concentration To Shock A Well Is 3 Pints (6 Cups Or 48 Fluid Ounces) Of Household Bleach For Every 100 Gallons Of Water In The System (Or In The Well If You’re Only Treating The Well Itself).Use Ordinary Liquid Laundry Bleach To Shock Chlorinate The Water System.use The Table Below To Determine How Much Chlorine Bleach You Will Need For.
Put the end of your hose into the well and turn the water on 3. You can’t use the well water immediately after shocking a well as it is chlorinated. Which type of bleach to use.
If Your Annual Water Test Results Show That Bacteria Is Present.
The dry pellets drop down past the pump and ensure the entire well is sanitized. Or you can test for chlorine using a swimming pool chlorine test kit. You may need to start using separate products to treat.
This Will Help To Disinfect Portions Of The Well That Are Connect A Hose To A Faucet That Is Farthest In The Water Supply System From The Well Head.
Remove the small well inspection plug on top of the well. Store water 2 days as per your consumption. If you’re using liquid chlorine bleach to shock your well water, make sure to use a plain, unscented bleach with a minimum of 5% sodium hypochlorite.